Environmental Sensors

AEC-LX001 Lux Meter

Light can have a huge impact on a worker’s health and their productivity. People deprived of light are found to be more tired, more prone to insomnia and less active. 500~750 lux is a recommended light level for a study room or a normal office. Lux luminance meters are used for measuring brightness in lux. Using high accuracy sensing element ensures the stability and reliability of AEC-LX001 Lux meter. The RS485, Modbus RTU or LoRa (Peer to Peer) provides continuous data to monitor center or to data logger for analysis or for energy saving. It can be used for measuring the brightness in greenhouse, workplace, public area, such as train station, library, museum, or food warehouse, parking lot, school, training center, offices and etc.

AVC-010 Oxygen Transmitter

The oxygen level is a very important indication of indoor air quality. It exists generally, in gaseous state at room temperature. When people stays in some places with low oxygen level, such as office, commercial building or basement, it might cause hypoxemia. Chronic fatigue is a major sign that people isn’t getting enough oxygen. Without enough oxygen in the lungs, the organs cannot function properly. As a result, toxins accumulate in the blood stream. AVC-010 Oxygen transmitter can monitor oxygen level and send the data to monitoring center for analysis or for ventilation control. Air quality can be, therefore, efficiently monitored and managed. Easy installation and the recommended height of installation is 1~2M above the floor level. It is perfect for household application, offices, indoor parking, library, hospital, shopping mall and etc.

AVC-810 AVC-910 Air Quality Transmitter

To define indoor air quality, it is important to monitor the concentration of several different gases or hazardous substance in air. Exposure to formaldehyde might increase the chance of getting cancer even at low levels; VOCs are emitted as gases from certain solids or liquids, such as building materials and furnishings, office equipment, wood preservatives, cleansers and disinfectants, dry-cleaned clothing or stored fuels and automotive products, etc.
AVC series air quality transmitter can measure the concentration of HCHO or TVOC, and also can send signal to
monitoring center to control air purifying or ventilation system, depending on measurement result. This would be an
efficient solution to ensure indoor air quality. Easy installation and the recommended height of installation is 1~2M above the floor level. Perfect applications are home, office, indoor parking, library, hospital, shopping mall and etc.

AVC-110 CO Transmitter

Carbon monoxide (CO) is a colorless, odorless, and tasteless gas that is slightly less dense than air. It is toxic to humans
and animals when encountered in higher concentrations, although it is also produced in normal animal metabolism in low
quantities, and is thought to have some normal biological functions. AVC-110 series is designed for monitoring the Carbon
monoxide concentration in order to avoid poor ventilation. Easy installation and the recommended height of installation is
1~2M above the floor level. In addition to provide a value display(optional), AVC-110 provides different signal output options
and one relay output for monitoring, analyzing and alarm. Being used with ventilation system, it can efficiently control and ameliorate air quality. Perfectly for basement parking, garage, residential apartment, offices or factories.

AVC-310 CO2/AVC-311 CO2 + Temp. & Humidity Transmitter

AVC-310 CO2 transmitter

CO2: Gold-plated infrared (NDIR) wave-guide technology with Automatic Baseline
Correction (ABC) and passive gas diffusion
(no moving parts)

AVC-311 CO2 + temperature & humidity transmitter

CO2: Gold-plated infrared (NDIR) wave-guide technology with Automatic Baseline Correction (ABC) and passive gas diffusion (no moving parts)
Temperature & humidity: CMOS sensor

AVC-M Indoor Air Quality Transmitter

In most public space or office buildings, the air ventilation and air quality is poor. The AVC-M series can detect several
important parameters of indoor air quality and environment, such as CO2, CO, HCHO, O2, NH3, TVOC, PM2.5, PM10,
temperature and humidity. Easy installation and the recommended height of installation is 1~2M above the floor level. It uses good quality sensors; such as the NDIR CO2 sensor; electro-chemical sensor for HCHO, CO, O2 and NH3; laser scattering principle sensor for PM2.5 and PM10; CMOS sensor for TVOC, temperature and humidity. AVC-M can be used with a monitoring system, which can activate ventilation system to keep a better indoor air quality or for energy saving. It is perfect for school, library, offices, meeting room, commercial building, shopping center, train/subway station or exhibition hall and etc.

AHT-5 Series Temperature & Humidity Transmitter

Rapid response time, high stability, high accuracy Microprocessor technology allows compact design, power saving and anti – interference. Streamline shape and elegant design. Complete product line and multi-function for various applications. RS485 (Modbus RTU) is available.

AHT-501 Temperature

AHT-502 Humidity

AHT-503 Temperature+ Humidity

AHT-504 Humidity+ Dew point

AHT-505 Temperature+ Dew point

AHT-506 Temperature+ Enthalpy

AHT-507 Temperature+ Wet-bulb
temperature

AHT-503H Temp. & Humidity Transmitter

AHT-503H series is designed for high humidity application. Using high accuracy dual function sensing element
ensures its stability and reliability. The housing of sensing probe uses metal sintered head design. It can cut the
risk of condensation, which might damage sensing element or reduce its lifespan. The AHT-503H is perfectly used
in wine cellar, mushroom farm, green house, warehouse, plant factory, poultry farm, server room and etc. In
addition to several signal output, LCD display is also an option for on-site monitoring

Gateways

AUS-401 LoRa Gateway

Easy to set up
– Two options of serial port RS232 or RS485 for flexible use
– Broadcast mode for pairing
– Simple structure for easy maintenance and operation
– Fast response
– For indoor use (standard)
– Outdoor antenna is also available (optional)
– Equipped with signal strength monitoring function

AUS-405 RS485, RS232 to LoRa converter

Easy to set up
– Convert RS232 or RS485 to LoRa wireless transmission
– Broadcast mode for pairing
– Simple structure for easy maintenance and operation
– Fast response
– For indoor use (standard)
– Outdoor antenna is also available (optional)